HYBRID MW MKII WOOFER
Tất cả các mẫu Hybrid MW đều tích hợp các công nghệ cốt lõi của Morel. Cuộn dây âm thanh Hexatech ngoài bằng nhôm 2 ¼” được quấn trên một lớp nhôm tạo ra chuyển động ổn định, hiệu quả và tuyến tính giống như piston, giúp giảm hiệu quả mức độ méo tiếng.
| MODEL | HYBRID MW4 MKII | HYBRID MW5 MKII | HYBRID MW6 MKII |
|---|---|---|---|
| Nominal Impendance (ohm) 4 | 4 | 4 | 4 |
| Power Handling Wrms | 100 | 120 | 140 |
| Max. Trans. Pwr Handling Wrms | 300 | 500 | 600 |
| Sensitivity (2.83 V/1M) dB | 89 | 90 | 91 |
| Frequency response Hz | 50-4200 | 45 – 3000 | 35 – 3000 |
| Resonant Freq. Fs Hz | 82 | 56 | 45 |
| Voice Coil Diameter mm (inch) | 54 (2.1) | 54 (2.1) | 54 (2.1) |
| Voice Coil Height mm (inch) | 10.50 (0.41) | 10.50 (0.41) | 11 (0.47) |
| Voice Coil Type/Former | Aluminium | Aluminium | Aluminium |
| Voice Coil Wire | Hexatech™ Aluminium | Hexatech™ Aluminium | Hexatech™ Aluminium |
| DC Resistance (ohm) | 3.2 | 3 | 3 |
| Voice Coil Induct. @1 kHz (mH) | 0.21 | 0.21 | 0.22 |
| Magnet System | Hybrid rear vented | Hybrid rear vented | Hybrid rear vented |
| HE-Magnetic Gap Height mm (inch) | 4 (0.16) | 4 (0.16) | 4 (0.16) |
| B-Flux Density (T) | 0.83 | 0.83 | 0.83 |
| BL Product/BXL | 4.16 | 4.2 | 4.2 |
| Max. Linear Ex./Xmax mm (inch) | 7 ± 3.5mm (0.28 ± 0.14) | 7 ± 3.5mm (0.28 ± 0.14) | 7 ± 3.5mm (0.28 ± 0.14) |
| Suspension Compliance CMS – mm/N | 0.57 | 0.78 | 1.1 |
| Electrical Q Factor QES | 0.63 | 0.59 | 0.56 |
| QTS | 0.46 | 0.45 | 0.44 |
| QMS | 1.74 | 1.8 | 2.08 |
| Mech. Resistance RMS- N . S / M | 1.98 | 1.96 | 1.5 |
| Moving Mass MMS – gr/ounce | 6.8 | 9.9 | 11 |
| Equiv. Can Air Load VAS – L (cu.ft3) | 3.17 (0.11) | 8.87 (0.31) | 21 (0.74) |
| Effective Piston Area SD sq.cm (sq.inch) | 64 (9.92) | 90 (13.95) | 119 (18.45) |
| Cone Type | One-piece formed | One-piece formed | One-piece formed |
| Cone Material | DPC | DPC | DPC |
| Unit Diameter mm(inch) | 109 (4.3) | 135 (5.25) | 165 (6.50) |
| Mounting Depth mm (inch) | 28.5 (1.12) | 60 (2.36) | 61 (2.40) |
| Mounting Cutout | 93 (3.6) | 120 (4.72) | 141 (5.55) |
| Net Wight Kg (lb) | 0.53 (1.1716) | 0.60 (1.32) | 0.60 (1.32) |
